CMCE-certified installer APPLICATION

Join our network of installation experts

Are you a licensed electrician looking to grow your business and offer cutting-edge lightning protection technology to your clients? We're actively hiring CMCE Installers to help meet growing demand across commercial, industrial, residential, and marine sectors.

CMCE Installation example for Six Lakes Country Club

The CMCE Lightning Suppressor unit must be installed at least 3-6 feet above the highest point of a structure, using a 1.5" aluminum or galvanized steel pipe. The mast can be mounted to the roof, the side of the structure, or a flagpole. When center roof installation are required, a tripod or roof bracket can be used.


The CMCE device must be grounded to an existing or new Delta ground system using a 2/O copper wire with a ground resistance of less than 5 ohms. A new grounding system can be created to reach the desired level of resistance.


Installers must have experience installing Delta ground systems to ensure proper grounding and optimal CMCE system performance.

LAND INSTALLATION

The CMCE unit should be installed at the highest point of the vessel, exceeding at least 1 foot above any existing equipment or antennas. VHF can be wrapped in heat shrink, and the CMCE device installed at the highest point, below VHF. The CMCE’s support mast of 1.5” galvanized steel should be mounted to a pole that is attached to the mast. A single, straight ground wire run is optimal, using 2 AWG. Grounded to the vessel’s busbar, anodes, or a grounding plate.

MARINE INSTALLATION

CMCE system installed on top of a yacht
CMCE system installed on the roof of a country club

To qualify to become a CMCE-Certified Installer, applicants must first meet the following criteria:


  • Be a licensed electrician or electrical contractor in your state or country
  • Possess proof of liability insurance
  • At least 5 years of experience working in commercial, industrial, residential, and/or marine industries
  • Be comfortable working at heights
  • Must be willing to travel 1-4 hours away for installations


Ongoing technical support and marketing materials will be provided to all certified partners.

iNSTALLER REQUIREMENTS

REQUEST AN APPLICATION NOW

We're currently expanding our installer network and actively seeking electricians in the United States and the Caribbean. Fill out the form below to express your interest. Serious inquiries only. A team member will reach out within 1-2 business days to guide you through next steps.

Contact Us